Technokrats

Technokrats

Technokrats

Chennai, Tamil Nadu

Alternator Test Bench

Technokrats has developed Alternator Test Bench to test the speed against voltage performance of the alternator motors.
The alternate test bench consists of electronic instrumentation to capture voltage, current, load readings along with motor rpm.

Alternator Starter Test Bench

Alternator Starter Test Bench

Send Business Enquiry

Item Code: M-116
Technical Specification

 

  • It is a Table top model capable of checking both 12 V and 24 V alternators and starter motors.

  • It is operated at two speeds for testing at lower and higher speeds along with multi groove pulley.

  • It has in built in AC voltage stabilizer.

  • It has 110 V series lamp test facility.

  • It has a heavy duty fast mounting jack.

  • It has MCBs and fuses for short circuit protection.

  • It has a vacuum testing arrangement.

  • It has a pure DC supply for alternator excitation voltage.

  • It has 12 V and 24 V DC source for testing horns, bulbs, solenoid switches etc.

  • It has power / battery option for alternator rotor energisation

  • through toggle switch with an indication lamp for 12 V and 24 V.

  • It has an electronic circuit for confirming status of alternator under test in the form of printed circuit boards for alternator rotor excitation.

  • Alternator loading through heavy duty cam operated rotary switches for withstanding high current for endurance testing. A total of eight steps or more (0 - 120 A) has been provided for alternator loading.

  • It has an Ohmmeter for resistance check of alternator and starter parts.

  • It has a Voltmeter for regulator saturation indication and W terminal voltage sensing meter for alternator.

  • It has 150 Amps / 1000 V bridge rectifier for 200 Amps testing facility for starters.

  • It has built in battery charging facility to charge the batteries through AC / DC source and be capable of indicating battery charging current

  • It has the capability to measure the condition of solenoids of starter motor by checking its ‘pull in voltage’, ‘pull in current’ and ‘hold on voltage’

Alternator Test Bench

We are a Leading Manufacturers, Suppliers & Exporters of Alternator Test Bench. This model is designed to function in a multitude of applications from auto parts jobbers & salvage yards to vocation and instructional institutions. The K150D tests both running alternators and starters with the same accuracy and performance you would expect to find in more expensive testers.

Specifications:

  • Digital volt and ammeter.
  • Test selector switch for starter or alternator test position.
  • Uses a 12 volt battery (not included) continuously, recharged during alternator testing. (GM alternators above 1986 require battery for testing).
  • Duplicates the circuitry found in an automobile.
  • Switch activates load for testing alternator. Dual load pre-set at 40 and 80 amps.
  • Indicator light for IC alts.
  • Field circuit protection-10 amp. fuse breaker, push to reset.
  • A minus and B plus field circuits.
  • Full field switch.
  • Tests all American alternators starters; tests all foreign made with additional harness leads.
  • 10 test leads for late models alternators.
  • 2 step pulley (3" and serpentine).
  • Testing of 6-12-24-32 volts (optional).
  • 5 HP, single Phase motor.
  • 230 volt, 60 Hz motor.
  • Dimensions: 18" wide x 2 1 " high x 24" deep.
  • Shipping weight: 100 lbs.

Computerized Alternator Test Bench

Computerized Alternator Test Bench

Send Business Enquiry

We are a Leading Manufacturers, Suppliers & Exporters of Computerized Alternator Test Bench. This test bench is operated by computer where the results are printed with the actual reading of the alternator.The alternator can be programmed to operate at stringent conditions to enable to debug the fault by simulating the vehicular conditions. The test bench can be run manually also .This is the complete electrical equipment for testing alternator which would be very useful for all new generation 0MPF vehicles.

Touch Screen Test Rig

Item Code: P-214

We are a Leading Manufacturers of Touch Screen Test Rig.

 

TECHNICAL SPECIFICATION:

 

 

  • It is a Table top model capable of checking both 12 V and 24 V alternators and starter motors.

  • It is operated at two speeds for testing at lower and higher speeds along with multi groove pulley.

  • It has in built in AC voltage stabilizer.
  • It has 110 V series lamp test facility.
  • It has a heavy duty fast mounting jack.
  • It has MCBs and fuses for short circuit protection.
  • It has a vacuum testing arrangement.
  • It has a pure DC supply for alternator excitation voltage. It should
  • It has 12 V and 24 V DC source for testing horns, bulbs, solenoid switches etc.
  • It has power / battery option for alternator rotor energisation
  • through toggle switch with an indication lamp for 12 V and 24 V.
  • It has an electronic circuit for confirming status of alternator under test in the form of printed circuit boards for alternator rotor excitation.
  • Alternator loading through heavy duty cam operated rotary switches for
  • withstanding high current for endurance testing. A total of eight steps or more
  • (0 - 120 A) has been provided for alternator loading.
  • It has an Ohmmeter for resistance check of alternator and starter
  • parts.
  • It has a Voltmeter for regulator saturation indication and W terminal voltage sensing meter for alternator.
  • It has 150 Amps / 1000 V bridge rectifier for 200 Amps testing facility for starters.
  • It has built in battery charging facility to charge the batteries through AC / DC source and be capable of indicating battery charging current
  • It has the capability to measure the condition of solenoids of
  • starter motor by checking its ‘pull in voltage’, ‘pull in current’ and ‘hold on voltage’

Autoelectrical Test bench

Autoelectrical Test bench

Send Business Enquiry

We are a Leading Manufacturers, Suppliers & Exporters of Autoelectrical Test bench.

Features:
  • We offer various types of alternator test rigs. The test rigs are designed for 30amps to 400 amps for 6v/12v/24/48v alternators.
  • The test rigs are available in 20 models with single speed, multi speeds and variable speed options. Vacuum pump test facility is also available in some of the models. All the equipments are fitted with latest digital meters and latest facilities for user friendly operation
  • Built-in Power source for excitation for the alternator, battery charging facility is also available to charge the battery from the alternator under test, so that the alternator performance can also judged.
  • For speed variable systems the speed is picked up right from the alternator pulley through non proximity sensor and indicator.
  • The exact graph specified by the manufacturer can be obtained from this test rig.

Alternator Starter Test Rig

Alternator Starter Test Rig

Send Business Enquiry

 

We are a Leading Manufacturers, Suppliers & Exporters of Alternator/Starter test rig. This test bench is operated by computer where the results are printed with the actual reading of the alternator.


 

Technical Specification

 

 

  • It is a Table top model capable of checking both 12 V and 24 V alternators and starter motors.

  • It is operated at two speeds for testing at lower and higher speeds along with multi groove pulley.

  • It has in built in AC voltage stabilizer.

  • It has 110 V series lamp test facility.

  • It has a heavy duty fast mounting jack.

  • It has MCBs and fuses for short circuit protection.

  • It has a vacuum testing arrangement.

  • It has a pure DC supply for alternator excitation voltage.

  • It has 12 V and 24 V DC source for testing horns, bulbs, solenoid switches etc.

  • It has power / battery option for alternator rotor energisation

  • through toggle switch with an indication lamp for 12 V and 24 V.

  • It has an electronic circuit for confirming status of alternator under test in the form of printed circuit boards for alternator rotor excitation.

  • Alternator loading through heavy duty cam operated rotary switches for withstanding high current for endurance testing. A total of eight steps or more (0 - 120 A) has been provided for alternator loading.

  • It has an Ohmmeter for resistance check of alternator and starter parts.

  • It has a Voltmeter for regulator saturation indication and W terminal voltage sensing meter for alternator.

  • It has 150 Amps / 1000 V bridge rectifier for 200 Amps testing facility for starters.

  • It has built in battery charging facility to charge the batteries through AC / DC source and be capable of indicating battery charging current

  • It has the capability to measure the condition of solenoids of starter motor by checking its ‘pull in voltage’, ‘pull in current’ and ‘hold on voltage’

 

Automobile Lab Test Equipment

Automobile Lab Test Equipment

Send Business Enquiry

Item Code: M-114
We are a Leading Manufacturers of Automobile Lab Test Equipment.

Technical Specification
  • It is a Table top model capable of checking both 12 V and 24 V alternators and starter motors.

  • It is operated at two speeds for testing at lower and higher speeds along with multi groove pulley.

  • It has in built in AC voltage stabilizer.

  • It has 110 V series lamp test facility.

  • It has a heavy duty fast mounting jack.

  • It has MCBs and fuses for short circuit protection.

  • It has a vacuum testing arrangement.

  • It has a pure DC supply for alternator excitation voltage.

  • It has 12 V and 24 V DC source for testing horns, bulbs, solenoid switches etc.

  • It has power / battery option for alternator rotor energisation

  • through toggle switch with an indication lamp for 12 V and 24 V.

  • It has an electronic circuit for confirming status of alternator under test in the form of printed circuit boards for alternator rotor excitation.

  • Alternator loading through heavy duty cam operated rotary switches for withstanding high current for endurance testing. A total of eight steps or more (0 - 120 A) has been provided for alternator loading.

  • It has an Ohmmeter for resistance check of alternator and starter parts.

  • It has a Voltmeter for regulator saturation indication and W terminal voltage sensing meter for alternator.

  • It has 150 Amps / 1000 V bridge rectifier for 200 Amps testing facility for starters.

  • It has built in battery charging facility to charge the batteries through AC / DC source and be capable of indicating battery charging current

  • It has the capability to measure the condition of solenoids of starter motor by checking its ‘pull in voltage’, ‘pull in current’ and ‘hold on voltage’

 

Alternator Test Equipment

Alternator Test Equipment

Send Business Enquiry

Item Code: P-216


We are a Leading Manufacturers, Suppliers & Exporters of Alternator Test Equipment.

Technical Specification:
  • It is a Table top model capable of checking both 12 V and 24 V alternators and starter motors.
  • It is operated at two speeds for testing at lower and higher speeds
  • along with multi groove pulley.
  • It has in built in AC voltage stabilizer.
  • It has 110 V series lamp test facility.
  • It has a heavy duty fast mounting jack.
  • It has MCBs and fuses for short circuit protection.
  • It has a vacuum testing arrangement.
  • It has a pure DC supply for alternator excitation voltage.
  • It has 12 V and 24 V DC source for testing horns, bulbs, solenoid switches etc.
  • It has power / battery option for alternator rotor energisation
  • through toggle switch with an indication lamp for 12 V and 24 V.
  • It has an electronic circuit for confirming status of alternator under
  • test in the form of printed circuit boards for alternator rotor excitation.
  • Alternator loading through heavy duty cam operated rotary switches for
  • withstanding high current for endurance testing. A total of eight steps or more
  • (0 - 120 A) has been provided for alternator loading.
  • It has an Ohmmeter for resistance check of alternator and starter parts.
  • It has a Voltmeter for regulator saturation indication and W
  • terminal voltage sensing meter for alternator.
  • It has 150 Amps / 1000 V bridge rectifier for 200 Amps testing facility for starters.
  • It has built in battery charging facility to charge the batteries
  • through AC / DC source and be capable of indicating battery charging current
  • It has the capability to measure the condition of solenoids of starter motor by checking its ‘pull in voltage’, ‘pull in current’ and ‘hold on voltage’

Starter Test Rig

Item Code: P-024
We are a Leading Manufacturers of Starter Test Rig.

Technical Specification:
  • It is a Table top model capable of checking both 12 V and 24 V alternators and starter motors.
  • It is operated at two speeds for testing at lower and higher speeds
  • along with multi groove pulley.
  • It has in built in AC voltage stabilizer.
  • It has 110 V series lamp test facility.
  • It has a heavy duty fast mounting jack.
  • It has MCBs and fuses for short circuit protection.
  • It has a vacuum testing arrangement.
  • It has a pure DC supply for alternator excitation voltage.
  • It has 12 V and 24 V DC source for testing horns, bulbs, solenoid switches etc.
  • It has power / battery option for alternator rotor energisation
  • through toggle switch with an indication lamp for 12 V and 24 V.
  • It has an electronic circuit for confirming status of alternator under
  • test in the form of printed circuit boards for alternator rotor excitation.
  • Alternator loading through heavy duty cam operated rotary switches for
  • withstanding high current for endurance testing. A total of eight steps or more
  • (0 - 120 A) has been provided for alternator loading.
  • It has an Ohmmeter for resistance check of alternator and starter parts.
  • It has a Voltmeter for regulator saturation indication and W
  • terminal voltage sensing meter for alternator.
  • It has 150 Amps / 1000 V bridge rectifier for 200 Amps testing facility for starters.
  • It has built in battery charging facility to charge the batteries
  • through AC / DC source and be capable of indicating battery charging current
  • It has the capability to measure the condition of solenoids of starter motor by checking its ‘pull in voltage’, ‘pull in current’ and ‘hold on voltage’


Products