|
What We Offer
|
 Auto Electrical Diagnostic Equipment's |
|
|
We provide one of the best Auto Electrical Test Equipments. All Auto Electrical Sub Parts are tested to the standars OEM specification. We also offer various types of small testers to be used in automobile garages and battery manufacturers. Two wheelers batteries testers are designed in smaller models. Battery chargers cater to charging of single battery to maximum of 10battreies with microprocessor base charging with closed loop monitoring so that the battery is cut off automatically after it is fully charged.
|
| | Computerised Alternator Test EquipmentThis test bench is operated by computer where the results are printed with the actual reading of the alternator.The alternator can be programmed to operate at stringent conditions to enable to debug the fault by simulating the vehicular conditions.
The test bench can be run manually also .This is the complete electrical equipment for testing alternator which would be very useful for all new generation mpf vehicles | | | Send Business Enquiry |
| | Fuel Injection Pump Test BenchFip test bench with electronic stroke/rpm counter and required basic accessories Option with the following: • Hydraulic drive • Belt drive • Thyrister type electronic drive | | | Send Business Enquiry |
| | | Automobile Electrical SystemWe offer various kinds of accessories used in the electrical system of automobile. We offer automobile electricals like headlamp bulb, fuse set, etc. The accessories manufactured by us are of very high quality and are very durable. | | | Send Business Enquiry |
| | | Alternator Test Rigs - We offer various types of alternator test rigs. The test rigs are designed for 30amps to 400amps for 6v/12v/24/48v ALTERNATORS.
- The test rigs are available in 20 models with single speed, multi speeds and variable speed options. Vacuum pump test facility is also available in some of the models. All the equipments are fitted with latest digital meters and latest facilities for user friendly operation
Features: - Built-in Power source for excitation for the alternator, battery charging facility is also available to charge the battery from the alternator under test, so that the alternator performance can also judjed.
- For speed variable systems the speed is picked up right from the alternator pulley through non proximity sensor and indicator.
- The exact graph specified by the manufacturer can be obtained from this test rig.
| | | Send Business Enquiry |
| | | Starter Test Rig - The Test Rigs are designed for light run,run torque and lock torque of the starter with 6v/12v/24/48v. The test rigs are available in various models.
- Simple Test Rig to check car starter with light run & run torque, which provides voltage & current.
- Heavy Duty Starters Test Rigs for Heavy Vehicles to check the light run & run torque.
- Complete Starter Performance Test Rig with PC Inter-phasing, operation through PC with print out facility.
Features : Built-in AC/DC power source, loading through latest technology powder brake system,torque sensing by torque sensors. | | | Send Business Enquiry |
| | | Automobile Electrical Parts Testers - We offer various types of small testers to be used in automobile garages and battery manufacturers.
- Two wheelers batteries testers are designed in smaller models. Battery chargers cater to charging of single battery to maximum of 10battreies with microprocessor base charging with closed loop monitoring so that the battery is cut off automatically after it is fully charged. Alternator regulator tester digital model is used to identify the faulty regulator in an alternator. This is universal model to check all types available in the market.
- Growler testers are available in two models to check the armature of starters. Distributor test rigs are designed to check the latest electronic distributor for MPFI vehicles.
- Ignition coil testers are designed to check the coils & spark plugs of the vehicles at a economical price. Vehicle electrical system demonstrate the complete vehicle electrical system which can be used to explain to students in institutes.
| | | Send Business Enquiry |
| | | Starter Test BenchFeatures: - Specially designed 3Kw fully variable speed Durst motor, 5000-0-5000 RPM.
- Available in 240v. Fitted with large easy to read analogue gauges: 0-18Volt Regulator tester, 3-0-3 Amp Diode tester, 10-20-50Volt meter, 50-100-500Amp meter and 6000-0-6000 Tacho meter, multi-groove drive pulley, quick clamping alternator brackets, starter clamp, switchable load bank and slide feed screw for easy belt tensioning.
- Dimensions 790mm D x 840mm W x 1420mm H. Weight 120 Kg
| | | Send Business Enquiry |
| | | Alternator Test BenchThis model is designed to function in a multitude of applications from auto parts jobbers & salvage yards to vocation and instructional institutions. The K150D tests both running alternators and starters with the same accuracy and performance you would expect to find in more expensive testers. Specifications: - Digital volt and ammeter.
- Test selector switch for starter or alternator test position.
- Uses a 12 volt battery (not included) continuously, recharged during alternator testing. (GM alternators above 1986 require battery for testing).
- Duplicates the circuitry found in an automobile.
- Switch activates load for testing alternator. Dual load pre-set at 40 and 80 amps.
- Indicator light for IC alts.
- Field circuit protection-10 amp. fuse breaker, push to reset.
- A minus and B plus field circuits.
- Full field switch.
- Tests all American alternators starters; tests all foreign made with additional harness leads.
- 10 test leads for late models alternators.
- 2 step pulley (3" and serpentine).
- Testing of 6-12-24-32 volts (optional).
- 5 HP, single Phase motor.
- 230 volt, 60 Hz motor.
- Dimensions: 18" wide x 2 1 " high x 24" deep.
- Shipping weight: 100 lbs.
| | | Send Business Enquiry |
| | Diesel Fuel Pump Test BenchMachine fitted with Electric Controls such as: Push Buttons Starter, Reversible Switch and no Volt overload Relays within easy access of the operator.
Electronic Digital Techometer is provided with the machine for accurate counting of RPM up to 9999 +/- RPM.
Accessories such as : Driving attachment for Rotatry Pumps, Flexible Steel Coupling and Heating Unit can also be provided with the machine on demand. | | | Send Business Enquiry |
|
Showroom
